For the Curt Trailer Hitch, # 15601, for the 2010 Ford F-250, we have several trailer wiring connector mounting brackets that you could use. First, for a basic 4-Way flat, you can use bracket # 18144 and No-Drill Mount Bracket, Short, # 18140, or No-Drill Mount Bracket, Long, # C57202.
For a 7-Way, you can use either the short or long No-drill bracket, mentioned above, and Mounting Bracket, # PK12711U. Another option for the 7-Way would be 7-Way Trailer Connector Mounting Box, # 18159.... view full answer...
We do have just the safety chain loops for the Ford factory fifth wheel rail kits like you have. For that you'd want the part # RP58468 and you'd be set. view full answer...
The correct Timbren Rear Suspension Enhancement System for your 2001 Ford F-350 4x4 is part # TFR350SDE. The other two choices you have for the rear either require drilling or are designed for commercial applications. The above is a direct fit and will do an excellent job of giving you extra support for towing or hauling. view full answer...
For your new 2012 Ford F-250 and Heartland 5th wheel trailer, I recommend going with a 16K Reese hitch which will give you plenty of room to spare as far as capacity and will provide you with years of service.
To me a standard bed is an 8 foot bed. That would mean you would need the fixed version, # RP30047. But if your bed is 6-3/4 feet long, you would need a slider. The slider that offers the most travel and most clearance for making tight turns is the round tube slider found with the... view full answer...
For your 2008 Ford F-250 King Ranch with a B&W Turnoverball Gooseneck Hitch I recommend the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle # AL57398 if your truck is 4WD or the # AL57397 if your truck is 2WD.
Both of these options are confirmed to work with your B&W hitch, and will give you 5000lbs of load leveling support when you are towing your gooseneck trailer or carrying a heavy payload.
To keep from having to manually inflate the air helper springs each time you are ready... view full answer...
A tow bar we have that has enough capacity for your 8,500 lb truck is the Demco Excali-Bar part # DM9511013-BX.
Then for a base plate kit the Blue Ox # BX2608 is confirmed as a fit for your truck and would work great. This was designed with the weight of your truck in mind so it would be rated for the weight as well.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your... view full answer...
I would recommend using a fifth wheel hitch with a slider on your 2011 Ford F-250 with a 6-3/4 foot bed. Failure to do so can result in the front of the trailer loft on your Cyclone 300C fifth wheel striking the rear of the truck cab during sharp turns and causing damage.
The hitch you are looking at, the Reese 16K 5th Wheel Trailer Hitch with Round Tube Slider, part # RP30075, is a great choice. I really like the round tube slider, as sometimes the square tube model sliders can bind,... view full answer...
The Stromberg Carlson Electric Trailer Jack # JET-5000 will easily have the capacity you need for your trailer. The 5,000 lb capacity for the jack is the lifting strength of it. On a trailer this relates to the tongue weight and not the total trailer weight. So if you have a 14,000 lb trailer you'd have a tongue weight most likely around 1,400 lbs which this would have no problem with. view full answer...
As long as the frame of your 2020 Forest River Heritage Glen 5th Wheel Trailer is 18" - 51" wide I highly recommend the Curt Adjustable Trailer Hitch Receiver # C13701 which can be bolted or welded to the frame of your trailer and offers a 500lb maximum tongue weight and 5000lb maximum trailer weight. You will want to check the owner's manual of your trailer or contact the manufacturer to verify the maximum trailer weight your trailer can tow.
Since you are planning to tow another trailer... view full answer...
The upper bracket part # AL07475 that you referenced is a fit for your 2003 Ford F-250 as this bracket is part of the kit part # AL57215 which is a fit for your truck. view full answer...
The Pro Series brand gives you an incredible value when compared to similar product brands. The price for the Pro Series Adjustable-Channel Coupler w/ Low Latch # PSA256S0303 is accurate. You will notice that most of the more expensive products similar to this have much higher capacities.
Check out the review video I attached for this coupler as well. view full answer...
As long as the Reese Pro Series 20k Sliding 5th Wheel Hitch you are purchasing uses the above bed industry standard rails (ISR) and not the OEM puck system I recommend the Curt Custom 5th Wheel Installation Kit for Ford # C16424-204 which is custom made for your 2012 Ford F-250 Short Bed which will minimize drilling.
You can see the Curt # C16424-204 being installed on a 2014 Ford F-250 in the included video. view full answer...
With a short-bed truck it is recommended that a slider fifth-wheel hitch be used to help compensate for the reduced turning clearance. Without the slider the trailer can strike the cab on sharp turns. The Slider allows the vehicle to make normal turns during low-speed maneuvering.
The fifth wheel prep package will work on a short bed. If you decide to go that route you can use a slider like the Reese 16K slider # RP30075 along with the Reese Elite Series Underbed Rail Adapter for Standard... view full answer...
For a fifth wheel rail installation kit you will want to go with a custom install kit like the Curt Rail Kit part # C16443-204. This kit has been confirmed to fit your 2008 Ford F-350 and will install in about half the time as a universal kit and will minimize drilling.
This kit is also compatible with your Curt E16 Fifth Wheel Hitch # C16115. view full answer...
Westin does not currently have an HDX grille guard that fits your 2019 Ford F-250 but they do have a Sportsman which the hardware kit for that would be the # 40-164PK. This wouldn't be a direct fit by any means but on the vehicle side the brackets would attach and could be a good base for a fabricator to come up with a solution to attach to the guard. view full answer...
Based on the pictures you sent in and the location of the Air Lift mounting brackets your best option for a fifth wheel rail kit is going to be a universal kit like the part # RP30035 which will fit around either side of your air bag kit and work well. view full answer...
I spoke with my contact over at RoadActive Suspension and there is a kit for your 2002 Ford F-350 with factory overload springs. It is # RAS3611-SLHD. But you will have to remove the factory overload springs to install it. The system though will more than make up for any capacity lost and you will also get all of the other benefits of the system including stability and better ride quality. This item also comes with spacer plates to take up the gap from the factory overload springs. view full answer...
If you install an 800-lb snowplow on the front of your 2002 Ford F-250 you will surely benefit from front-end load support in the form of an air bag kit like the Firestone Ride-Rite # F2223. This kit is a confirmed fit on your truck. For a rear axle kit you can use Ride-Rite # F2550 and an install video is linked to illustrate.
I recommend using a dual path compressor kit # F2168. This allows you to control the front and rear air bags independently. If you were to carry, for example, a... view full answer...
Since your 2006 Ford F-250 has a 6-3/4 foot bed, you will want to use a sliding 5th wheel hitch to provide additional turning clearance between the truck and trailer. My favorite sliding hitch is the Demco Hijacker Autoslide 5th Wheel Trailer Hitch # DM8550034. This trailer hitch features an automatic sliding feature that makes it my favorite, and it is made here in the USA.
Traditional sliding hitches require you to pull over and get in and out of the vehicle several times in order to... view full answer...
Best option we have for you is the Rear View Safety Backup Camera System # RVS-778718N. This will replace the rear view mirror of your 2000 Ford F-250 and give you one with a monitor built into it. The camera hardwires to the monitor and mounts on a rear license plate frame. It has gridlines too which you said you wanted. view full answer...